3000mW 80x80mm Mini Logo Printer USB Desktop DIY bluetooth Laser Engraving Machine

Specifications:Material: ABS(Acrylonitrile Butadiene Styrene plastic) + Aluminium alloyColor: blackVoltage: AC 110-220VLaser power: 3000 mWPositioning Accuracy: 0.01mmEngraving range: 80x80mm / 3.1"x3.1"Applicable range: Plane surfaceOperating System: WIN-97/03/7/8/10 (в–ІWindows Vista / XP, Unix, Linux are not supported);for Mac OS SystemPicture format: JPG / GIF / BMP / DIB / ICO / CUR /PNGSize: 15.2 x 16.6 x 14.3 cm / 5“ * 6.5“ * 5.6” Support mobile phone bluetooth connection. Usage:Operation instruction video: https://drive.google.com/drive/folders/0B1YOCyE7igQgRWh2OUNOWEhEbWMSoftware download: https://drive.google.com/file/d/1V3FMLE5Qec3kU-UlsgyVv_f_ozqvArYl/viewStep 1.Insert the USB disk Step 2: Install the "driver.exe"Step 3: Must Copy the "English zip" to Computer desktop and then unzip it.Step 4: Connect the engraver to computerStep 5: Open the "scarve-en.exe" which is unzip from the  "English zip" Our power is sufficient. If the power is found to be insufficient during use, the following three conditions can be detected.1. Check if the power supply output voltage is 12V2. Check if the machine is connected properly3. Check if the focus is adjusted Application:A laser carving machine for home use,mainly used in wood, bamboo, PCB, leather, paper, plastic and so on. Note:1.The product is a laser carving machine for home use, a tool machine, can not be compared with laser carving machine for industrial use.2.Do not use the laser head to point at human or livestock,do not use laser to point at people’s eyes.3.Laser has power.skin exposure to laser is strictly prohibited.4.The caving machine should not be stopped while working, it will cause a damage.5.This product not suitable for kids under age of 14.6.Do not fall or make any collision to the product.7.The shell with laser cutting technology,sharp edge,please pick up and down gently to prevent scratches.8.Metal, glass, crystal and transparent or translucent stuff are can not be engraved.9.The color of the item may vary slightly due to photography and different PC monitor, and the size might be slightly errored due to manual measurement.  Your kindly understanding would be appreciated.10.You might need to temporarily shut down the antivirus software before downloading the software. Otherwise some files in the software would be mistaken for virus and deleted by antivirus software. 11.Please according to the user manual to operate the machine. After 20 minutes of working, it need to take a break, can not work continuously for a long time. Package Included:1 Pcs x Laser engraver1 Pcs x USB disk1 Pcs x Screw driver5 Pcs x Screws5 Pcs x Screw caps1 Pcs x Power cord1 Pcs x USB cable2 Pcs x Wooden board1 Pcs x Chinese / English manual(distribute the adapter according to your country)