Specification:
Material: PE Line
Connector: 3/4"
Length of line: 18m
Scope of application: Wetting and descaling, air humidification, chemical treatment, chemical spraying, liquid spraying, to-bacco leaf humidification, tablet coating, flue gas evaporative cooling, sterilization, component cooling, fruit spray Wax, tile glazing, plant humidification, salt spray test, artificial fog, humidification in other places, etc.

Features:
1.Great for cooling your outdoor living areas.
2.Can be widely used in plant humidification, cooling, disinfection, dust reduction, landscaping, salt spray test and other artificial fog.
3.No air assistance is required, the system is simple, the spray point is fine, the atomization is sufficient, energy and water saving, low cost and good effect.

Installation Steps:
1.Connect the adapter to the water tap.
2.Turn on the water tap to wash the system for 1 minute to purge the system and remove any impurities.
3.Using cable tie to fixed the pipe.
4.Turn on the tap slightly until jets are working, enjoy the cooling misting system.
5.Turn off the nozzles, keep them dry and clean when you don't use the misting system for a long time.

Package Included:
1 x 18M Line
25 x Brass with Stainless Nozzles(2 for Spare)
20 x Cable Ties
1 x White Plastic ring