$27.97
Add to Cart
7V 1.4W Solar Powered Floating Birdbath Water Fountain Pump LED Pond Pool Decor
More than 10 available
Details
Shipping: Australia: $4.00 (more destinations)
Condition: Brand new
*The store has not been updated recently. You may want to contact the merchant to confirm the availability of the product.
Specification*LED: 4 LED Beads (Multicoloured)*Solar Panel: 7V / 1.4W*Diameter of Solar Panel: 16cm (6.3 inches)*The Power of Pump: 3.5V-12V*Maximum Flow Quantity of Pump: 200 L/H*Battery: Li 3.7V / 1500mAh*The Life Time：≧10,000 Hours*Lift Height：55cm
NoticeSpray height: 55cm, connect different spray heads, the spray height will be different. When the solar panel receives sufficient sunlight, the pump will start within 3 seconds.Place the solar panel in a suitable place to ensure that it is not blocked by other objects. When the solar panel receives sufficient light, the water pump works normally.When the pump is just placed in the water, there is air in it, which may affect the spray effect. It is recommended to wait for the pump to spray normally before connecting the nozzle.This product has no external battery, and the height of the water spray depends entirely on the strength of the sunlight. When the sunlight is weak, the pump will not work continuously, but will automatically start repeatedly until the sunlight reaches a certain intensity after the pump resumes continuous operation.
Install1.No extra screws and no plugs is needed.2.Put the pump totally in the water with it’s nozzle over the water, be sure the pump is fixed firmly on the bottom of the fountain to avoid vibration.3.Plug the jack of pump in the jack of solar panel output.4.Put the solar panel under enough sunlight and then it will star to work
Tips of Using the Solar Pump1. Clean the pump regularly to avoid pump from getting stuck.2. Don't make the pump work without water for a long time, or its lifespan will be shortened.3. The pumps will work continuously only under bright sunshine. It will also be affected by weather, seasons, places, etc.
Operation suggested1. Remove the film which covers the solar panel before using;2. Solar panel must be fully exposed in sunlight without any part shaded by leaves or any other things;3. Let the solar pump under enough sunshine and water height depends on the strength of the sunlight.4. Pull out of the plug(the head part) firstly, and make the pump work for seconds to let the air go out of the pump, then put on the plug to see if it could work well.
Package included1 x Solar Power Panel1 x Brushless DC Water Pump (with power wire)3 x Spray Head4 x Filter
NoticeSpray height: 55cm, connect different spray heads, the spray height will be different. When the solar panel receives sufficient sunlight, the pump will start within 3 seconds.Place the solar panel in a suitable place to ensure that it is not blocked by other objects. When the solar panel receives sufficient light, the water pump works normally.When the pump is just placed in the water, there is air in it, which may affect the spray effect. It is recommended to wait for the pump to spray normally before connecting the nozzle.This product has no external battery, and the height of the water spray depends entirely on the strength of the sunlight. When the sunlight is weak, the pump will not work continuously, but will automatically start repeatedly until the sunlight reaches a certain intensity after the pump resumes continuous operation.
Install1.No extra screws and no plugs is needed.2.Put the pump totally in the water with it’s nozzle over the water, be sure the pump is fixed firmly on the bottom of the fountain to avoid vibration.3.Plug the jack of pump in the jack of solar panel output.4.Put the solar panel under enough sunlight and then it will star to work
Tips of Using the Solar Pump1. Clean the pump regularly to avoid pump from getting stuck.2. Don't make the pump work without water for a long time, or its lifespan will be shortened.3. The pumps will work continuously only under bright sunshine. It will also be affected by weather, seasons, places, etc.
Operation suggested1. Remove the film which covers the solar panel before using;2. Solar panel must be fully exposed in sunlight without any part shaded by leaves or any other things;3. Let the solar pump under enough sunshine and water height depends on the strength of the sunlight.4. Pull out of the plug(the head part) firstly, and make the pump work for seconds to let the air go out of the pump, then put on the plug to see if it could work well.
Package included1 x Solar Power Panel1 x Brushless DC Water Pump (with power wire)3 x Spray Head4 x Filter
CN, Jiangsu Sheng