Package included:1x Water pump(with 3m Ciga-rette lighter)1x Water g un(with 6m pipe)1x Inlet pipe1x Water outlet interface Specification:Product name: 12V High Pressure Diaphragm Self Priming Water Pump 5-7Lpm 120WMaterial: ABS Plastic+MetalWeight: approx.1300gSize: 31.0 cm * 13.0 cm * 19.0 cm/12.2*5.1*7.5inchCiga-rette lighter: 300cm/118.1inchOutlet pipe: 600cm/236.2inchColor: Black, Orange, WhiteVoltage: 12V DCCurrent: 6-8AFlow: 5-7L/minPower: 120WFeature: High pressure&Intelligent Circuit protection&Water outlet adjustmentScope of application: car wash, foaming, rinsing the ground, watering flowers Description:The shell is made from high quality ABS plastic material, which is not only durable but also stable to use for a long-lasting life.It is easy and convenient to install, just plug and play, costing you a little time, saving you energy and time.Built to greatly quality control standards, so it has a stable performance and excellent quality.Be of lower noise than other ordinary water pump, you don’ t have to worry about too much noise.Intelligent circuit protection, safer and convenient to use, and providing you a long-lasting service life.Equipped with self-priming function, which is very convenient to use.Possessing a rubber bracket, it can absorb the vibration when it works, which is stabler and safer.It can be used in washing cars, high pressure and large water outlet for an easier cleaning cars.Wonderful performance will give you an unbelievable experience. Cleaning and maintenance1. Connection: Connection of the high pressure cleaner water pipe The g un handle and barrel should be cleaned on time and lubricated with water-insoluble grease.2. Nozzle: The nozzle is blocked because the pressure inside the pump is too high. At this time, it needs to be cleaned immediately. You can carefully insert a sharp object to the top of the nozzle to make it smooth.3. Inlet water filter: Excessive residue in the filter of the washing machine, the water consumption of the cleaning agent will be limited, and the pump will be damaged.1. Remove the quick connector at the water inlet and filter to clean the internal filter.2. Flush the filter Straight knife without fine debris or blockage. Immediately replace the filter and quick coupler to prevent any foreign objects from entering the pump.